Plastic products have peculiar smell? Don't be afraid, the seven solution can be solved
Plastic products will be distributed out of very unpleasant smell in the process, everybody in the daily life, buy shoes or some plastic products will have some strong plastic taste, the cause of this problem is the problem of the production process, in order to overcome this problem, everybody for a long time since these are committed to reduce odor. In addition, many friends in the new material recycling material doped with a certain proportion, and the granulation of the taste is more important, it is a common problem in production, this paper is sorted according to the network information, so it provided a total of seven solutions.
After the granulation smell there are mainly four reasons, the first is the material is more complex, the second materials multiple processing and degradation, third is the decomposition of the material of small molecular materials, fourth is water and some materials to accelerate the degradation of strong。
Because plastic products added additives or recycled material, make plastic products with ethylene, hydrogen sulfide, sulfur dioxide, ammonia, amine smell or other odor. A part of WIP storage smell after a period of time will be released; sometimes lurking in the plastic products, when two processing of these harmful gases will be further released, the smell of a plastic. Typical ways of solving odors are by adding gas absorbents and antibacterial agents to the plastic to prevent the bacteria and fungi from having an unpleasant odor. The presence of residual odors can also be reduced by solvent extraction and venting.
Treatment of peculiar smell of plastics
手机网投排行1, the correct use of additives
Catalysts used in the production of polyurethane foam often produce a strong odor and fog on the inner windows of automobiles. The solution to this problem is to find replacements for these amines. In the case of polyhydroxy compounds, polyhydroxy compounds are not only components of the polyurethane chain but also catalytically active.
手机网投排行Phenolic stabilizers used in PVC extrusion or calendaring are often replaced by low odor zinc stabilizers. Heat stabilizer tin is also commonly used in automotive PVC products due to its low odor and low fogging characteristics. Extraction of plant oil such as erucic acid and oleic acid than animal extract amine lubricant prepared (for styrene polyolefin and food packaging materials) the smell of small lot.
2。 Treatment of recycled material
Organic solvent extraction helps to remove odor compounds. A new method of solvent extraction using supercritical carbon dioxide as the solvent, this technology has been applied in HDPE and PET, it can remove the oil container, pesticide containers and other waste devices smelling pollutants. The advantage of CO2 extraction is that it does not bring about troublesome post-treatment problems with organic solvents.
Odor removal is a component of the spent plastic particle extruder, and it can also effectively remove some volatile compounds that produce odors.
3, the use of more pure resin
In many plastics, especially in PVC, styrene, poly (ethyl acetate) and acrylic esters, traces of residual traces can produce an unpleasant odor。 The odor is eliminated by the use of a small amount of residual resin in the monomer。
4. Add adsorbent
手机网投排行In polymers, if a small amount of zeolite (an aluminosilicate adsorbent) is filled, it can remove the odor of the material。 Zeolites have a large number of crystalline voids, which can capture small molecules of gas that have odor。
Molecular adsorbents have been successfully applied to polyolefin extrusion tubes, injection and extrusion blow containers, isolated packaging materials, extruded outer packing materials and sealing polymers. Molecular adsorbent powder can also be used as a moisture absorbing agent to add water to the plastic to remove moisture. These vapors also contribute to the odour of plastic products.
手机网投排行5, use antibacterial agent
Adding antibacterial agents to plastics can not only reduce the smell, but also retard the aging, discoloration and brittleness of the products. The most commonly used antibacterial agent 10,10'- oxybis phenoxarsine (OBPA), three oxygen two hydroxy phenyl ether (Triclosan), isothiazolin ketone (OIT), pyrithione (Pyrithione). An organic metallic compound containing tin and silver; sometimes used as an antiseptic.
6。 Using desorption method
There is also a method of removing odor by placing the plastic in such an odor adsorbent as activated carbon and high surface area silicate. The vacuum treatment environment allows the desorption process to accelerate. Treating plastic particles with a special detergent solution can also help remove odors. In general, these detergents are aqueous or alkaline solutions containing surfactants. These detergents can effectively remove vinyl chloride monomer, styrene, acrylic ester, acrylic monomer and unsaturated hydrocarbons.
7。 Add in aromatics
手机网投排行The inclusion of fragrances in plastics does not eliminate unpleasant smells, but they can cover them considerably. In many cases, this is enough. The method can be applied to polyethylene, polypropylene and polyolefin thermoplastic elastomers, which are processed by injection molding, extrusion, or blow molding.
Fragrance retention time is not equal to the molding of life, its retention time depends on the degree of aggregation, volume surface ratio, whether exposure to heat or a humid environment, there will be molded tight air packaging and many other factors. Aromatic agents are generally used in toys, commodities, cosmetics containers, household appliances and garden equipment.